Behind the Scenes: Post-Production of Balance

9 min read

Deviation Actions

nxxos's avatar
By
Published:
890 Views
:iconadiar: :heart: :iconnxxos:

*************************************
*************************************

After having submitted "Balance", I received so many questions how I got this result. So in this journal I want to show you how I took the shot and how I processed the image in Photoshop.


Rivers, lakes and trees are great spots for infrared images. Fortunately, there's a river flowing right through our village, so I don't have to walk too far to find a place like this:




The clouds and their reflections on the water looked perfect to me, so I put my camera (a Sony Alpha) on the tripod, screwed the Hoya R72 IR filter on the lens and shot away.

Tip: Due to the long exposure time, you should use a remote control or the self-timer to avoid vibrations. For best results, wait until there is no wind and the leaves on the trees are not moving.

I experienced that a white balance of 2500K G9 works best for my camera but different camera models might require different settings. Since the Hoya R72 IR filter is almost black it always takes some time to get a sharp image with the auto focus. Once the focus is good enough I set the camera to manual focus (to "lock" the focus) and shot several images with different exposures in RAW mode. Thus I can choose the best exposure later because the display of the camera might not show the brightness accurately. Moreover, many different exposures allow me to create an HDR image if desired.

When I was back home I chose this image for post-production:




The exposure seemed just right; nothing is over- or underexposed. I imported the RAW file to Photoshop without adjusting anything at first.

Then I cropped the image at the bottom to get a width/height ratio of about 1.6:1, which equals roughly the golden mean and is more eye-pleasing:




After that I had Photoshop adjust the levels automatically by pressing Shift+Ctrl+L:




Then I used the channel mixer (Image > Adjustments > Channel Mixer) to get a blue hue. I chose "Red" as the output channel and moved the source channel slider of red to 0% and the slider of blue to 100%. Then I chose "Blue" from the output channel menu and slided red to 100% and blue to 0%. Afterwards the image looked like this:




Now that doesn't look too bad, does it? But still there's a lot to be done. I found the saturation a bit too much so I decreased it with the PowerRetouche Saturation plug-in (setting -90/photographic):




In order to increase the contrast by making the trees a bit whiter (they still have a magenta hue) and the sky darker I applied a red filter with the PowerRetouche Studio Black and White plug-in. The result looks like this:




Alternatively, you can experiment with the Photoshop photo filters (Image > Adjustments > Photo Filter).

However, there's still too much magenta in the trees. So I set the saturation (Image > Adjustments > Hue/Saturation) of magentas to -75, of reds to -70 and of blues to -50 in order to make them look more natural:




For the last step I used the dodge tool (O) and set a few highlights on the trees to make them look more plastic and whiter. With the elliptic marquee tool (feather: 100 pixels) I selected some trees to increase the contrast and to bring out the branches more. Before submitting the image to deviantART I resized it, sharpened it, and added a border so that it looks good on a computer screen.




You can see the final version here:

Balance by nxxos


Wallpapers:

1280x1024:
Balance Wallpaper by nxxos

1024x768:
Balance Wallpaper 1024x768 by nxxos


I hope you enjoyed this tutorial. If you have any questions please don't hesitate to ask me. A similar tutorial can be found here: tutorials20.com/misc/infrared-…

*************************************
*************************************

Sony Alpha Stamp by nxxos Fav and Run by Fractoid:thumb23115756: talentclub__stamp by afr3ak Photographers Club Stamp by PhotographersClub Ex-po-zure Stamp by l8 Winner monthly contest 25 by NaturPics-club fine art stamp by JessicaBader Photo-Hut stamp by deviantStamps LV stamp by lensvision
:iconwaterscapes-club: :iconportrets: :iconunseen-photographers: :iconsony-club: :iconphoto-genius: :iconlandscapeclub: :iconeliteartists: :iconstreet-photographers:
© 2007 - 2024 nxxos
Comments127
Join the community to add your comment. Already a deviant? Log In
Thinking-Silence's avatar
hm..
The question is, if I need an IR-Filter to get the image...

A negative of your first (colour!) pictures has similar attitudes like the white trees of an IR...
With some more colour adjustments it would work very similar :)

Maybe Just use an polarizing filter zu change the structure of the sky.

Tell me, if I'm talking rubbish :)

And thanks for this tutorial ;)
Greets
Jan